This unit describes the skills and knowledge required to operate a backhoe/loader to load, distribute and place materials.
This unit applies to those working in site based roles.
Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors, and must be sourced from state jurisdictions prior to applying this unit.
1-2 Days depending on experience (that can be verified).
$650.00 per machine (Must have access to the machines)
Dates available upon request
The student must demonstrate completion of loader/backhoe operations that safely, effectively and efficiently follows workplace procedures to carry out work activity on at least two occasions, and include:
conducting prestart checks prior to commencing operations and shutdown procedures on completion of operations
driving and operating the equipment, and adjusting techniques to suit site conditions
completion of operations to specification using at least two different material types (i.e. one different material type per occasion) including:
mixing materials
stripping/spreading materials
trench excavation
backfilling
lifting and carry materials
loading dump trucks, wagons, hoppers or chutes
cutting/boxing
selecting, fitting, testing, using and removing at least two attachments (i.e. one attachment per occasion), which must be certified and approved in line with workplace procedures and could include, but are not limited to, the following:
extending devices
tilt bucket
buckets
compaction wheel
ripper
plate compactor
rock breaker
auger
broom
mower/slasher
forklift
4 in 1 bucket and free/rock grab
parking and securing of equipment
In the course of the above work the student must also:
locate and apply relevant documentation, policies and procedures
select and wear personal protective equipment required for work activities
carry out vehicle refuelling requirements and procedures where applicable
apply safe work practices, identifying and reporting all potential hazards, risks and environmental issues
apply problem solving and troubleshooting techniques when operating equipment
monitor and manage equipment performance using indicators and alarms
identify common equipment faults
apply levelling techniques
establish weight of load
manage changes in the loads centre of gravity during transportation
select and use the required tools and equipment
work safely around other machines and personnel
apply methods of changing machine attachments
use a range of communication techniques and equipment essential to the safe completion of work activity, including hand, audible and other signals
meet written and verbal reporting requirements and procedures associated with equipment operations
organise work activities to meet all task requirements
Prior to enrolling in this course you will need to obtain a Unique Student Identifier (USI) please visit www.usi.gov.au and ensure you have at least one form of identification
You will be required to conduct mathematical calculations throughout this course
All students must pass a language, literacy & numeracy assessment (LLN)
identification must be the originals and not laminated, also add a link to Safework NSW EOI: SW08446-0718-423971.pdf
PPE is required including safety boots and a hi-vis shirt
Tea and Coffee is provided (if conducted at our facilities), local shops are nearby
Please arrive 10 minutes prior to the commencement of training
Assessments will be conducted over the duration of the course – Knowledge, Calculations and Practical Assessments. All critical components must be demonstrated and answered correctly.
Re -assessment
Applicants deemed not yet competent will be provided the opportunity to undergo further training Note: There may be an extra cost for reassessment
This is a Nationally Recognised Training course and applicants deemed competent at the conclusion of the course will be provided with a Statement of Attainment for the applicable unit of competency that they completed.
In the event of cancellation or withdrawal:
Students who give notice to cancel their enrolment more than 10 days prior to the commencement of a program will be entitled to a full refund of fees paid.
Students who give notice to cancel their enrolment less than 10 days prior to the commencement of a program will be entitled to a 75% refund of fees paid. The amount retained (25%) by All Onsite Training and Assessment is required to cover the costs of administration and resources which will have already been committed based on the students initial intention to undertake the training.
Students who cancel their enrolment after a training program has commenced will not be entitled to a refund of fees.
If All Onsite Training and Assessment cancels the training course, and is not rescheduling then a full refund will be returned to the payer.
Please refer to the AOTA Student Handbook through the Student Info Menu , as well as:
Nationally Recognised Training - Gain qualifications that are valued and accepted across Australia.
N
Industry-Specific Expertise - Benefit from instructors with real-world experience in your sector.
N
Government Funding Available - Eligible students can access fee-free training through the Smart and Skilled program.
N
State-of-the-Art Facilities - Train in modern environments equipped with the latest industry tools and equipment.
IllawarraConstruct
Our interactive web application is your essential guide to navigating this exciting landscape. Discover the projects shaping the Illawarra, explore the skills in high demand, and map out your career path in an industry with endless opportunities—all in real time.
Illawarra’s Trusted, Australian-Owned Safety Training Provider
AOTA is your trusted partner for nationally-accredited training courses, empowering your workforce and ensuring regulatory compliance. As an Australian-owned company, we are dedicated to delivering high-quality, industry-relevant training to the Illawarra region. Our comprehensive suite of courses includes:
Work Health & Safety
High-Risk Work Training
Heavy Vehicle Licensing
Construction White Card
Earthmoving Machinery Operation
Working at Heights
Confined Spaces and more..
AOTA - Illawarra Project Spotlight
Illawarra Project Spotlight
Major projects are shaping our region. Hover over a project to see the skills required, and click to find the AOTA courses that get you site-ready.
Find Your Course Category:
High Risk Work
Heavy Vehicle Licensing
Construction
Earthmoving
First Aid
WH&S
Verification of Competency
Cert III Courses
Short Courses
Register Your Interest Today
Nationally Approved & Accreditated Courses by ASQA
ASQA (Australian Skills Quality Authority) ensures the quality and integrity of our training in Australia. When you choose AOTA an ASQA-registered provider, you can trust that your training meets national standards and equips you with the skills employers demand. Invest in your future with confidence.
N
Quality Assurance
N
Learner Protection
N
Employer Confidence
N
National Consistency
Your Career, Your Pace, Courses for Industry Success
Skill gaps or outdated certifications holding you back? AOTA’s targeted, hands-on training programs tackle industry-specific challenges head-on. From safety compliance to high-risk work qualifications, we’ll get you up-to-speed and job-ready. Flexible scheduling, government funding options, and expert instructors ensure you gain the skills needed to excel. Unlock new opportunities and achieve your career goals with AOTA.
Most Enrolled Courses
Z
Forklift Operations
TLILIC0003 – Licence to operate a forklift truck Gain the essential skills and knowledge for safe and efficient material handling in any workplace. Our comprehensive training covers everything from pre-operation checks and load handling techniques to maneuvering in tight spaces and emergency procedures.
TLILIC0005 – Licence to operate a boom type elevating work platform (boom length 11 metres or more)
RIIHAN301E – Operate elevating work platform at any height. Elevate your skills and safety with our comprehensive Elevating Work Platform (EWP) courses. Gain AOTA accredited training and master the safe operation of boom lifts, scissor lifts, and more. Learn hazard identification, risk assessment, and emergency procedures for confident work at any height.
RIIWHS204E – Work safely at heights Conquer heights safely with our comprehensive Work safely at heights course. Gain the skills and knowledge to assess risks, select appropriate equipment, and work confidently at elevated levels. Our AOTA-compliant training ensures you meet industry standards and prioritise your safety and the safety of those around you.
MSMWHS217 – Gas test atmospheres Gain essential skills for confined space entry with our AOTA-accredited course. Learn hazard identification, gas testing, safe entry/exit, PPE use, and emergency response. Ensure safety in challenging workplaces.
CPCCWHS1001 Prepare to work safely in the construction industry Kickstart your construction career with the essential Construction White Card. Get certified and work safely on any site. Learn about potential hazards, risk management, and emergency procedures so you’re prepared for a safe and successful career in construction.
Gain expertise in operating excavators, bulldozers, and more with our AOTA-accredited earthmoving course. Learn essential skills for site preparation, excavation, and material handling. Build a successful career in construction, mining, and infrastructure development
CPCCLDG3001 Licence to perform dogging – Gain the skills and knowledge to safely plan and perform dogging operations, including slinging and directing the movement of loads using various lifting equipment. Obtain your nationally recognised Dogging Licence.
CPCCLRG3001 Licence to perform rigging basic level – Acquire the essential skills and knowledge to safely plan and perform basic rigging operations, including selecting and inspecting lifting equipment, slinging loads, and communicating effectively during lifting activities. Obtain your nationally recognised Basic Rigging Licence.
Get your Heavy Rigid licence and confidently operate heavy rigid vehicles with our comprehensive training. Learn essential driving skills, safety protocols, and road rules to excel in the transport and logistics industry
Get your Medium Rigid licence with confidence. Our professional instructors provide comprehensive training on both automatic and synchromesh vehicles, ensuring you’re prepared for any driving situation.
We believe in proving skills, not just talking about them. That’s why our VOC process includes both knowledge assessments (sometimes on-the-job) and practical demonstrations. We’ll observe you in action to confirm you can handle the real-world tasks.
Validate Your Expertise with VOC and Open Doors to New Opportunities.
Don’t just learn, demonstrate your mastery. AOTA’s hands-on training and VOC assessments ensure you’re job-ready for high-risk work and construction. Our industry-experienced instructors guide you through practical skills and real-world scenarios, building your confidence and competence. Unlock new opportunities and achieve your full potential with AOTA.
N
Hands-on Learning
N
Job Readiness
N
Expert Guidance
N
Confidence and Competence
Testimonials
“Highly recommended. The friendly staff were very helpful with offering me set course days to choose from. A special thanks to Phil, he shared so much more knowledge than what was required for the ticket, he’s helpful, easy to understand and makes it fun..”
Allan Andersen
“Bloody awesome did my white card today and really enjoyed it great teacher!!! Thank you.”
Debbie Martiska
“Experienced trainers and efficient staff. I didn’t know what to expect but finished the day with a new skill, taught by a a patient and persistent trainer. AOTA is a good training organisation.“
Jerry Bour
“Completed my HR truck licence today with a trainer named Peter. Had an absolutely incredible experience. Loved the course and highly recommend!”
Des
“Needed to upgrade licence fast, these guys and gals were super efficient and on the ball. Excellent equipment and trainers, Peter is a treasure of experience and knowledge. Fantastic experience, thoroughly recommend!”
Brendan Urquart-Eastwood
Frequently Asked Questions
How do I enrol in a course?
You can enrol online through our website. Simply browse our course catalog, select the course you’re interested in, and follow the enrollment instructions. If you have any questions or need assistance, feel free to contact us.
What are the payment options?
We accept various payment methods, including credit/debit cards, PayPal, and direct bank transfers.
Can I get a refund if I change my mind?
Our refund policy varies depending on the course. Please review the specific course information or contact us for details on cancellations and refunds. Generally, we offer refunds within a certain timeframe before the course start date, subject to certain conditions.
Will I receive a certificate upon completion?
Yes, upon successful completion of a course, you will receive a certificate of completion or attainment, depending on the course type. This certificate recognises your achievement and can be valuable for career advancement or further study.
What if I need help during the course?
We provide support throughout your learning journey. You can contact our dedicated support team via email or phone if you have any questions or need assistance.
Your Future Self Will Thank You - Enrol Today!
Empower your future with our comprehensive range of training courses. From construction and safety to heavy equipment and heavy vehicle operation, we provide the skills and certifications you need to succeed in your chosen field. Explore our courses and start your journey towards a fulfilling career.
Gain the confidence to operate specialised equipment safely with our courses. From cranes and forklifts to rigging and scaffolding, heavy vehicle licensing, plant operation, through to construction and first aid, and much more!! We’ll prepare you for success in high-demand industries.
Expert Instruction: Learn from experienced professionals.
Hands-On Training: Gain real-world experience.
Industry Certification: Earn credentials to advance your career.
“AOTA Illawarra’s training was top-notch! The instructors were knowledgeable and passionate, and the hands-on experience was invaluable. I feel confident and prepared to tackle any high-risk work situation. Thanks, AOTA!“
Sarah M. Towradgi
“I was nervous about getting my crane licence, but AOTA Illawarra made the process easy and enjoyable. The training was thorough and well-structured, and the instructors were patient and supportive. I’m so glad I chose AOTA!“
John D. Shellharbour
“I highly recommend AOTA Illawarra to anyone seeking high-risk work training. The facilities are excellent, the equipment is modern, and the instructors are truly dedicated to helping their students succeed. I’m proud to be an AOTA graduate!“
Brad Walton. Helensburg
Enrol Today / Guarantee your future
Ready to Take the Next Step?
Don’t wait! Enrol today and unlock new opportunities in exciting industries.
Secure your spot in our upcoming courses.
Gain the skills and confidence to operate specialised equipment safely.
Advance your career with a nationally recognised certification.
